• Remove the two screws at the bottom of
  
  the phone with the torx 6 screwdriver. Remove the other two screws with
  
  the Phillips screwdriver
  

• Lift the antenna cover away from the
  
  phone. It unclips at the top of the phone and needs a little force to
  
  remove
  

• Remove the two torx 6 screws at the top
  
  of the phone which are revealed after removing the antenna cover
  

• Pull the front cover away at each side
  
  so that it releases
  

• The phone will now be in two parts, as
  
  below
  

• Wiggle and pull the keypad assembly up,
  
  away from the phone and it will pop off
  

• The screen assembly is held on by two
  
  clips at each side of the phone, indicated below. Unclip them to remove
  
  the screen assembly
  

• Unclip the ribbon which hold the screen
  
  assembly to the circuit board of the phone. It attaches like a plug and
  
  socket
  
  
  

• 
  
  Detach the retaining clips
  
  on each side of the screen assembly
  

• 
  
  Remove the faulty screen and
  
  replace with the new screen
  

Reverse the whole procedure for reassembly